Empire Builder

For other uses, see Empire Builder (disambiguation).

Empire Builder

The Empire Builder at Maple Springs, Minnesota, in September 2018
Overview
Service type	Inter-city rail
Locale	Midwestern and Northwestern United States
First service	June 10, 1929 (1929-06-10)
Current operator(s)	Amtrak
Former operator(s)	Great Northern (1929–1970) Burlington Northern (1970–1971)
Annual ridership	348,993 (FY23) 15.0%
Route
Termini	Chicago, Illinois Seattle, Washington or Portland, Oregon
Stops	38 (Seattle–Chicago) 37 (Portland–Chicago)
Distance travelled	2,206 miles (3,550 km) (Seattle–Chicago) 2,257 miles (3,632 km) (Portland–Chicago)
Average journey time	45 hours, 10 minutes (Portland to Chicago) 45 hours, 15 minutes (Seattle to Chicago) 45 hours, 55 minutes (Chicago to Portland) 46 hours, 10 minutes (Chicago to Seattle)
Service frequency	Daily
Train number(s)	7, 8 (Seattle–Chicago) 27, 28 (Portland–Chicago)
On-board services
Class(es)	Coach Class Sleeper Service
Disabled access	Train lower level, all stations
Sleeping arrangements	Roomette (2 beds) Bedroom (2 beds) Bedroom Suite (4 beds) Accessible Bedroom (2 beds) Family Bedroom (4 beds)
Catering facilities	Dining car, Café
Observation facilities	Sightseer lounge car
Baggage facilities	Overhead racks, checked baggage available at selected stations
Technical
Rolling stock	GE Genesis Siemens Charger Superliner
Track gauge	4 ft 8+1⁄2 in (1,435 mm) standard gauge
Operating speed	50 mph (80 km/h) (avg.) 79 mph (127 km/h) (top)
Track owner(s)	BNSF, CPKC, Metra, MNNR
Route map Cascades to Eugene Coast Starlight to Los Angeles 2257 mi 3632 km Portland Columbia River OR WA 2247 mi 3616 km Vancouver, Washington Cascades, Coast Starlight 2182 mi 3512 km Bingen-White Salmon 2151 mi 3462 km Wishram                   Route 1971–1981             Route 1971–1981 to Seattle East Auburn Ellensburg Yakima 2025 mi 3259 km Pasco (Tri-Cities) 2206 mi 3550 km Seattle 2188 mi 3521 km Edmonds 2173 mi 3497 km Everett Cascades to Vancouver, BC Cascade Tunnel 2072 mi 3335 km Leavenworth 2050 mi 3299 km Wenatchee 1996 mi 3212 km Ephrata Train divides at Spokane 1877 mi 3021 km Spokane WA ID 1807 mi 2908 km Sandpoint ID MT Pacific Time Mountain Time Troy Closed 1973 1723 mi 2773 km Libby Flathead Tunnel 1620 mi 2607 km Whitefish 1599 mi 2573 km West Glacier 1573 mi 2531 km Essex 1542 mi 2482 km East Glacier Park Summer only 1528 mi 2459 km Browning Winter only 1495 mi 2406 km Cut Bank 1471 mi 2367 km Shelby 1366 mi 2198 km Havre 1277 mi 2055 km Malta 1211 mi 1949 km Glasgow 1162 mi 1870 km Wolf Point MT ND Mountain Time Central Time 1055 mi 1698 km Williston 989 mi 1592 km Stanley 935 mi 1505 km Minot 874 mi 1407 km Rugby 817 mi 1315 km Devils Lake 732 mi 1178 km Grand Forks 658 mi 1059 km Fargo Red River of the North ND MN                Route prior to 1979                Route prior to 1979 Breckenridge Morris Willmar Minneapolis Closed 1978 610 mi 982 km Detroit Lakes 548 mi 882 km Staples 482 mi 776 km St. Cloud Midway 1978–2014 411 mi 661 km Saint Paul 371 mi 597 km Red Wing 308 mi 496 km Winona Mississippi River MN WI 281 mi 452 km La Crosse 240 mi 386 km Tomah 195 mi 314 km Wisconsin Dells 178 mi 286 km Portage 150 mi 241 km Columbus 86 mi 138 km Milwaukee WI IL 18 mi 29 km Glenview 0 mi Chicago other Amtrak services other Amtrak services California Zephyr, Illinois Zephyr, and Southwest Chief Lincoln Service and Texas Eagle City of New Orleans, Illini and Saluki Capitol Limited, Lake Shore Limited, and Michigan Services Cardinal All stations are accessible

The Empire Builder is a daily long-distance passenger train operated by Amtrak between Chicago and either Seattle or Portland via two sections west of Spokane. Introduced in 1929, it was the flagship passenger train of the Great Northern Railway and was retained by Amtrak when it took over intercity rail service in 1971.

The end-to-end travel time of the route is 45–46 hours for an average speed of about 50 mph (80 km/h), though the train travels as fast as 79 mph (127 km/h) over the majority of the route. It is Amtrak's busiest long-distance route.

During fiscal year 2023, the Empire Builder carried 338,993 passengers, an increase of 15.0% from FY2022 but 21.8% below pre-COVID-19 levels (433,372 passengers during FY2019). During FY2022, the train had a total revenue of $49,600,000.

History

Empire Builder on the Stone Arch Bridge, Minneapolis, c. 1929

The Great Northern Railway inaugurated the Empire Builder on June 10, 1929. It was named in honor of the company's founder, James J. Hill, who had reorganized several failing railroads into the only successful attempt at a privately funded transcontinental railroad. It reached the Pacific Northwest in the late 19th century, and for this feat, he was nicknamed "The Empire Builder". Following World War II, Great Northern placed new streamlined and diesel-powered trains in service that cut the scheduled 2,211-mile trip between Chicago and Seattle from 58.5 hours to 45 hours.

The schedule allowed riders views of the Cascade Mountains and Glacier National Park, a park established through the lobbying efforts of the Great Northern. Re-equipped with domes in 1955, the Empire Builder offered passengers sweeping views of the route through three dome coaches and one full-length Great Dome car for first class passengers.

The train at Winona Junction, Wisconsin, in 1958

In 1970, the Great Northern merged with three other closely affiliated railroads to form the Burlington Northern Railroad, which assumed operation of the Builder. Amtrak took over the train when it began operating most intercity routes a year later. To improve its farebox recovery ratio, Amtrak shifted the Chicago–St. Paul leg to run through Milwaukee via the Milwaukee Road. Before 1971, the Chicago–St. Paul leg used the Chicago, Burlington and Quincy Railroad's mainline along the Mississippi River through Wisconsin. The service also used to operate west from the Twin Cities before turning northwest in Willmar, Minnesota, to reach Fargo.

Amtrak added a Portland section in 1981, with the train splitting in Spokane. This restored service to the line previously operated by the Spokane, Portland and Seattle Railway. It was not the first time that the train had operated Seattle and Portland sections; Great Northern had split the Builder in Spokane for much of the 1940s and 1950s.

In 2005, Amtrak upgraded service to include a wine and cheese tasting in the dining car for sleeping car passengers and free newspapers in the morning. Amtrak's inspector general eliminated some of these services in 2013 as part of a cost-saving measure.

During summer months, on portions of the route, "Trails and Rails" volunteer tour guides in the lounge car give commentary on points of visual and historic interest that can be viewed from the train.

After running daily for the better part of a century, the Empire Builder was cut back to tri-weekly operation along with most of Amtrak's other long-distance routes on October 12, 2020, as part of a round of service reductions due to the COVID-19 pandemic. For most of the fall and winter of 2020–21, trains departed Chicago on Mondays, Thursdays and Saturdays and departed Seattle or Portland on Tuesdays, Thursdays and Saturdays. However, in March 2021, Amtrak announced the train would return to its pre-pandemic daily schedule on May 24, 2021.

Incidents

On May 27, 1931, the eastbound Empire Builder was struck by a tornado in Clay County, Minnesota. The train, carrying 117 passengers, had all of its cars, minus the locomotive and coal tender, thrown off the tracks by the tornado, with one car being thrown 80 feet (24 m) off the track. One passenger died, with 57 others injured.

On March 7, 1966, the eastbound Empire Builder suffered a head-on collision with a Western Star mail and passenger train going in the opposite direction. This occurred near Chester while Great Northern's then-president John M. Budd was aboard. The two engineers both died in the collision and 79 were injured; 29 of those were hospitalized in what came to be known at the Great Northern Buelow wreck.

The westbound Empire Builder derailed near Joplin, Montana, on September 25, 2021, with three fatalities.

Ridership

The Empire Builder is Amtrak's most popular long-distance train. Over fiscal years 2007–2016, Empire Builder annual ridership averaged 500,000, with a high of 554,266 in FY 2008. Revenue peaked in FY 2013 at $67,394,779. About 65% of the cost of operating the train is covered by fare revenue, a rate among Amtrak's long-distance trains second only to the specialized East Coast Auto Train.

Traffic by Fiscal Year (October–September)

	Ridership	Change over previous year	Ticket Revenue	Change over previous year
2007	504,977	-	$53,177,760	-
2008	554,266	09.76%	$59,461,168	011.81%
2009	515,444	07.0%	$54,064,861	09.07%
2010	533,493	03.5%	$58,497,143	08.19%
2011	469,167	012.05%	$53,773,711	08.07%
2012	543,072	015.75%	$66,655,153	023.95%
2013	536,391	01.23%	$67,394,779	01.1%
2014	450,932	015.93%	$54,545,844	019.06%
2015	438,376	02.78%	$50,541,140	07.34%
2016	454,625	03.7%	$51,798,583	02.48%
2017	454,000	00.13%	$59,000,000	013.9%
2018	428,854	05.53%	$57,600,000	02.37%
2019	433,372	01.05%	$57,500,000	00.17%
2020	253,486	041.5%	$32,400,000	043.65%
2021	220,681	012.94%	$38,400,000	018.52%
2022	303,568	037.56%	$49,600,000	029.17%
2023	348,993	015%	$61,100,000	023.19%

Route

The Portland section of the Empire Builder at Union Station in Portland, Oregon

The current Amtrak Empire Builder passes through Oregon, Washington, Idaho, Montana, North Dakota, Minnesota, Wisconsin, and Illinois. It makes service stops in Spokane, Washington; Havre, Montana; Minot, North Dakota; and Saint Paul, Minnesota. Its other major stops include Vancouver, Washington; Whitefish, Montana; Williston, North Dakota; Fargo, North Dakota; and Milwaukee, Wisconsin. It uses BNSF Railway's Northern Transcon from Seattle to Minneapolis, Minnesota Commercial Railway from Minneapolis to St. Paul, Canadian Pacific Kansas City (former Milwaukee Road) from St. Paul to Rondout, Illinois, and Metra's Milwaukee District / North Line (former Milwaukee Road) from Rondout to Chicago. The St. Paul to Chicago portion currently follows the route of the former Twin Cities Hiawatha, and beginning in May 2024 has been supplemented by the Borealis. In pre-Amtrak days it used the Twin Zephyrs routing.

The Seattle section uses the Cascade Tunnel and Stevens Pass as it traverses the Cascade Range to reach Spokane, while the Portland section runs along the Washington side of the Columbia River Gorge. The cars from the two sections are combined at Spokane. The combined train then traverses the mountains of northeastern Washington, northern Idaho and northwestern Montana, arriving in Whitefish in the morning. The schedule is timed so that the train passes through the Rocky Mountains (and Glacier National Park) during daylight – an occurrence that is more likely on the eastbound train during summer. Passengers can see sweeping views as the Builder travels along the middle fork of the Flathead River, crossing the Continental Divide at Marias Pass. After crossing Marias Pass, the Empire Builder leaves Glacier National Park and enters the Northern Plains of eastern Montana and North Dakota.

The land changes from prairie to forest as it travels through Minnesota. From Minneapolis-St. Paul, the Empire Builder crosses the Mississippi River at Hastings, Minnesota and passes through southeastern Minnesota cities on or near Lake Pepin before crossing the Mississippi again at La Crosse, Wisconsin. The service travels southeast through rural south-central Wisconsin, turns due south at Milwaukee, and ends at Chicago Union Station.

The westbound Empire Builder leaves Chicago in early afternoon, arriving in Milwaukee just before the afternoon rush and in St. Paul in the evening. After traveling overnight through Minnesota, it spends most of the following day traveling through North Dakota and Montana, arriving at Glacier National Park in the early evening and splitting late at night in Spokane. The Seattle section travels through the Cascades overnight, arriving in Seattle in mid-morning. The Portland section arrives in the Tri-Cities just before breakfast and in Portland in mid-morning. The eastbound Seattle and Portland sections leave within five minutes of each other just before the afternoon rush, combining in Spokane and traveling through Montana overnight before arriving at Glacier National Park in mid-morning and Williston at dinner time. After traveling overnight through North Dakota and Minnesota, it arrives in St. Paul at breakfast time, Columbus/Madison at lunch time, Milwaukee in early afternoon and Chicago just before the afternoon rush.

Stops at Milwaukee Airport and Sturtevant were added beginning March 21, 2020, to replace Hiawatha trains suspended due to the COVID-19-related drastic drop in demand. Additionally, local travel was allowed between Chicago and Milwaukee. These adjustments lasted until the train resumed its normal schedule in May 2021.

Empire Builder route map

Flooding

A GE Genesis in 40th-anniversary Phase I paint leads a stub Empire Builder out of St. Paul, Minnesota after floods suspended service west. (2011)

The line has come under threat from flooding from the Missouri, Souris, Red, and Mississippi Rivers, and has occasionally had to suspend or alter service. Most service gets restored in days or weeks, but Devils Lake in North Dakota, which has no natural outlet, is a long-standing threat. The lowest top-of-rail elevation in the lake crossing is 1,455.7 ft (443.70 m). In spring 2011, the lake reached 1,454.3 ft (443.27 m), causing service interruptions on windy days when high waves threatened the tracks.

BNSF, which owns the track, suspended freight operations through Devils Lake in 2009 and threatened to allow the rising waters to cover the line unless Amtrak could provide $100 million to raise the track. In that case, the Empire Builder would have been rerouted to the south, ending service to Rugby, Devils Lake, and Grand Forks. In June 2011 agreement was reached that Amtrak and BNSF would each cover 1/3 of the cost with the rest to come from the federal and state governments.

In December 2011, North Dakota was awarded a $10 million TIGER grant from the US Department of Transportation to assist with the state portion of the cost. Work began in June 2012, and the track is being raised in two stages: 5 feet (1.5 m) in 2012, and another 5 feet in 2013. Two bridges and their abutments are also being raised. When the track raise is complete, the top-of-rail elevation will be 1,466 ft (446.84 m). This is 10 feet above the level at which the lake will naturally overflow and will thus be a permanent solution to the Devils Lake flooding.

In the spring and summer of 2011 flooding of the Souris River near Minot, North Dakota blocked the route in the latter part of June and for most of July. For some of that time the Empire Builder (with a typical consist of only four cars) ran from Chicago and terminated in Minneapolis/St Paul; to the west, the Empire Builder did not run east of Havre, Montana. (Other locations along the route also flooded, near Devils Lake, North Dakota and areas further west along the Missouri River.)

Freight train interference

An oil boom from the Bakken formation, combined with a robust fall 2013 harvest, led to a spike in the number of crude oil and grain trains using the Northern Transcon in Montana and North Dakota. The resulting congestion led to rampant delays for the Empire Builder, with the train running on time 44.5% in November 2013, the worst on-time performance of any Amtrak route and well below congressional standards. In some cases, the delays resulted in an imbalance of crew and equipment, forcing Amtrak to cancel runs of the Empire Builder. By May 2014, only 26% of Empire Builder trains had arrived within 30 minutes of their scheduled time, with delays averaging between 3 and 5 hours. In some cases, freight congestion and severe weather resulted in delays as long as 11 to 12 hours. This was a marked change from past years in which the Empire Builder was one of the best on-time performers in the entire Amtrak system, ahead of even the flagship Acela Express.

Due to the increasingly severe delays, Amtrak adjusted the route's schedule west of St. Paul on April 15, 2014. Westbound trains left St. Paul later, while eastbound trains left Seattle/Portland approximately three hours earlier. Operating hours for affected stations were also officially adjusted accordingly. The Amtrak announcement also said that BNSF was working on adding track capacity, and it was anticipated that sometime in 2015 the Empire Builder could be returned to its former schedule. In January 2015, it was announced that the train would resume its normal schedule.

Even during the worst of the delays, the train has seen frequent patronage from workers in the Bakken fields and their families who board and detrain in Williston. Passengers travel from as far as the Pacific Northwest.

Former stops

In the cab of the Empire Builder, 1974. Photo by Charles O'Rear.

In 1970, the construction and filling of Lake Koocanusa necessitated the realignment of 60 miles (97 km) of track between Stryker, Montana, and Libby, Montana, and the construction of Flathead Tunnel, leading the Empire Builder to drop service to Eureka, Montana. The Empire Builder also served Troy, Montana, until February 15, 1973.

On October 1, 1979, the Empire Builder was rerouted to operate over the North Coast Hiawatha's old route between Minneapolis and Fargo, North Dakota. With this alignment change, the Empire Builder dropped Willmar, Minnesota; Morris, Minnesota; and Breckenridge, Minnesota, while adding St. Cloud, Minnesota; Staples, Minnesota; and Detroit Lakes, Minnesota.

Another alignment change came on October 25, 1981, when the Seattle section was rerouted from the old Northern Pacific (which had also become part of the BN in 1970) to the Burlington Northern Railroad's line through the Cascade Tunnel over Stevens Pass. This change eliminated service to Yakima, Washington; Ellensburg, Washington; and Auburn, Washington. This change also introduced the Portland section, which returned service to the former Spokane, Portland and Seattle Railroad line (which became part of BN in 1970) along the Washington shore of the Columbia River. The route kept Pasco, but added Wishram, Bingen-White Salmon, and Vancouver (all in Washington) to the route. From Vancouver, the Portland section of the Empire Builder uses the same route as the Coast Starlight and Cascades trains to Portland Union Station.

It has been proposed that the Empire Builder and Hiawatha trains servicing Glenview, Illinois have their station stop be shifted one station north to the Metra station at North Glenview, to eliminate stops which block traffic on Glenview Road. North Glenview would have to be modified to handle additional traffic, and the move depends on commitments from Glenview, the Illinois General Assembly, and Metra. In Minnesota, the Empire Builder returned to Saint Paul Union Depot on May 7, 2014, 43 years after it last served the station the day before the start of Amtrak. Renovation of the 1917 Beaux Arts terminal was undertaken in 2011, continuing through 2013, resulting in a multi-mode terminal used by Jefferson Lines, Greyhound Lines, commuter bus and the Metro Green Line, providing a light rail connection to downtown Minneapolis. The station replaced Midway Station which opened in 1978 after the initial abandonment of Saint Paul Union Depot in 1971 and the demolition of Minneapolis Great Northern Depot in 1978.

Equipment

Current equipment

Empire Builder crosses the Two Medicine Trestle at East Glacier Park, Montana, 2011.

Like all long-distance trains west of the Mississippi River, the Empire Builder uses bilevel Superliner passenger cars (except for the baggage car). The Empire Builder was the first train to be fully equipped with Superliners, with the first run occurring on October 28, 1979.

A typical Empire Builder consist includes:

• Two or three GE Genesis or Siemens Charger ALC-42 locomotives
• Viewliner baggage car
• Superliner transition sleeper car
• Two Superliner sleeper cars
• Superliner diner
• Superliner coach
• Superliner Sightseer Lounge/café
• Superliner coach
• Superliner coach/baggage car
• Superliner sleeper

In Spokane, the westbound train is split: the locomotives, baggage car, and first six passenger cars continue on to Seattle as train 7, while a single locomotive is used to take the remaining cars (including the lounge/cafe) to Portland as train 27. Eastbound the sections are combined in a reverse fashion, with the Seattle section numbered as train 8 and the Portland section as train 28. During peak travel periods, an additional coach is added to the rear of the train between Chicago and St. Paul. It is left overnight in St. Paul for the next day's return trip to pick up. This car is designated train 807 westbound and train 808 eastbound.

Amtrak’s Siemens Charger ALC-42 locomotives were first used in revenue service on the Empire Builder on February 8, 2022.

Historical equipment

The train along the Columbia River, c. 1947

When first launched in 1929, the Great Northern provided new heavyweight consists. When the railway received five new streamlined trainsets in 1947, the old heavyweight sets were used to reintroduce the Oriental Limited. In 1951 the Empire Builder was re-equipped with six new streamlined trainsets; the 1947 cars were used to launch the Western Star, while the Oriental Limited was retired. When the GN acquired dome coaches in 1955, the 1951 coaches went to Western Star, while the 1947 coaches went to the pool of spare and extra-movement cars. Ownership of the cars on the Empire Builder was by-and-large split between the Great Northern and the Chicago, Burlington and Quincy Railroad (CB&Q), though a couple of cars in the original consists were owned by the Spokane, Portland and Seattle Railway (SP&S). In this consist, one of the 48-seat "chair" cars and one of the 4-section sleepers were used for the connection to Portland, while the rest of the consist connected to Seattle.

The Great Northern coaches eventually found their way into state-subsidized commuter service for the Central Railroad of New Jersey after the Burlington Northern merger and remained until 1987 when NJ Transit retired its last E8A locomotive. Some of these cars remain in New Jersey. Some coaches were acquired from the Union Pacific; these also went to New Jersey. One of the 28 seat coach-dinette cars also remains in New Jersey and is stored near Interstate 78 wearing tattered Amtrak colors.

Bibliography

• Hidy, Ralph W.; Hidy, Muriel E.; Scott, Roy V.; Hofsummer, Don L. (2004) [1988]. The Great Northern Railway: A History. Minneapolis: Minnesota University Press. ISBN 978-0-816-64429-2. OCLC 54885353.
• Sanders, Craig (2006). Amtrak in the Heartland. Bloomington, Indiana: Indiana University Press. ISBN 978-0-253-34705-3.
• Wayner, Robert J., ed. (1972). Car Names, Numbers and Consists. New York: Wayner Publications. OCLC 8848690.
• Yenne, Bill (2005). Great Northern Empire Builder. Great Passenger Trains. MBI. ISBN 0-7603-1847-6. OCLC 57142776.

Further reading

• Morgan, David P. (2016). "The Clean-Window Train". In McGonigal, Robert S. (ed.). Great Trains West. Waukesha, WI: Kalmbach Publishing. pp. 96–107. ISBN 978-1-62700-435-0.
• Welsh, Joe (December 2000). "The Empire Builder: Seven decades of service". Trains. 60 (12): 72–80. ISSN 0041-0934.

External links

• Media related to Empire Builder at Wikimedia Commons
• Empire Builder travel guide from Wikivoyage
• Empire Builder – Amtrak